Operation Manual

Chapter 34 User Account
VMG/XMG Series User’s Guide
341
34.2.1 The User Account Add/Edit Screen
Click Add New Account or the Edit icon of an existing account in the Maintenance > User Account to
open the following screen.
Figure 217 Maintenance > User Account > Add/Edit
The following table describes the labels in this screen.
Lock Period This field displays the length of time a user must wait before attempting to log in again after a
number if consecutive wrong passwords have been entered as defined in Retry Times.
Group This field displays whether this user has Administrator or User privileges.
Modify Click the Edit icon to configure the entry.
Click the Delete icon to remove the entry.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.
Table 150 Maintenance > User Account (continued)
LABEL DESCRIPTION
Table 151 Maintenance > User Account > Add/Edit
LABEL DESCRIPTION
Active Select Enable or Disable to activate or deactivate the user account.
User Name Enter a new name for the account. This field displays the name of an existing account.
Password Type your new system password (up to 256 characters). Note that as you type a password, the
screen displays a (*) for each character you type. After you change the password, use the new
password to access the Zyxel Device.
Verify New
Password
Type the new password again for confirmation.
Retry Times Enter the number of times consecutive wrong passwords can be entered for this account. 0
means there is no limit.