Operation Manual

Chapter 39 Log Setting
VMG/XMG Series User’s Guide
354
Figure 226 Maintenance > Log Setting
The following table describes the fields in this screen.
Table 159 Maintenance > Log Setting
LABEL DESCRIPTION
Syslog Setting
Syslog Logging The Zyxel Device sends a log to an external syslog server. Click this switch to enable or disable to
enable syslog logging. When the switch goes to the right , the function is enabled.
Otherwise, it’s not.
Mode Select the syslog destination from the drop-down list box.
If you select Remote, the log(s) will be sent to a remote syslog server. If you select Local File, the
log(s) will be saved in a local file. If you want to send the log(s) to a remote syslog server and
save it in a local file, select Local File and Remote.
Syslog Server Enter the server name or IP address of the syslog server that will log the selected categories of
logs.
UDP Port Enter the port number used by the syslog server.
Email Log Settings
Email Log
Settings
Click this switch to have the Zyxel Device send logs and alarm messages to the configured email
addresses. When the switch goes to the right , the function is enabled. Otherwise, it’s not.