Operation Manual

Chapter 40 Firmware Upgrade
VMG/XMG Series User’s Guide
358
Figure 229 Firmware Uploading
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click OK to go back to the Firmware
Upgrade screen.
Figure 230 Error Message
Current
Firmware
Version
This is the present Firmware version and the date created.
File Path Type in the location of the file you wasn’t to upload in this field or click Choose File to find it.
Choose File Click this to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload Click this to begin the upload process. This process may take up to two minutes.
Upgrade WWAN Package
Current
WWAN
Package
Version
This is the present WWAN Package version and the date created.
File Path Type in the location of the file you want to upload in this field or click Choose File to find it.
Choose File Click this to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload Click this to begin the upload process. This process may take up to two minutes.
Table 160 Maintenance > Firmware Upgrade
LABEL DESCRIPTION