Operation Manual

Chapter 1 Introducing the Zyxel Device
VMG/XMG Series User’s Guide
38
USB Green On The Zyxel Device recognizes a USB connection through the USB slot.
Blinking The Zyxel Device is sending/receiving data to/from the USB device
connected to it.
Off The Zyxel Device does not detect a USB connection through the USB slot.
Table 9 XMG3927-B50A/VMG3625-T50A/VMG3927-BX0A/VMG8825-BX0A LED Descriptions
LED COLOR STATUS DESCRIPTION
POWER Blue On The Zyxel Device is receiving power and ready for use.
Blinking The Zyxel Device is self-testing.
Red On The Zyxel Device detected an error while self-testing, or there is a device
malfunction.
Blinking The Zyxel Device is uploading firmware.
Off The Zyxel Device is not receiving power.
WAN Blue On One of the following connections is up.
•ADSL
•G.fast
•VDSL
• Ethernet connection on the WAN.
Blinking
(slow)
The ADSL/G.fast/VDSL link is down, and the Zyxel Device is looking for an
ADSL/G.fast/VDSL link.
Blinking
(fast)
The Zyxel Device is initializing the ADSL/G.fast/VDSL link.
Off There is no Ethernet connection on the WAN.
INTERNET Blue On Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the DSL
connection is up.
Blinking The Zyxel Device is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
Red On The Zyxel Device attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
ETHERNET1~4 Blue On The Zyxel Device has a successful 10/100/1000 Mbps Ethernet connection
with a device on the Local Area Network (LAN).
Blinking The Zyxel Device is sending or receiving data to/from the LAN at 10/100/
1000 Mbps.
Off The Zyxel Device does not have an Ethernet connection with the LAN.
2.4G WLAN/
WPS
Blue On The 2.4 GHz wireless network is activated.
Blinking The Zyxel Device is communicating with 2.4 GHz wireless clients.
Amber Blinking The Zyxel Device is setting up a WPS connection with a 2.4 GHz wireless
client.
Off The 2.4 GHz wireless network is not activated.
5G WLAN/
WPS
Blue On The 5 GHz wireless network is activated.
Blinking The Zyxel Device is communicating with 5 GHz wireless clients.
Amber Blinking The Zyxel Device is setting up a WPS connection with a 5 GHz wireless client.
Off The 5 GHz wireless network is not activated.
Table 8 VMG3925-B10C LED Descriptions (continued)
LED COLOR STATUS DESCRIPTION