Operation Manual

Chapter 2 The Web Configurator
VMG/XMG Series User’s Guide
62
2.2.2 Widget Icon
Click this icon ( ) to arrange the screen order. Select a block and hold it to move around. Click the
Check icon ( ) in the lower left corner to save the changes.
Email
Notification
Email Notification Use this screen to configure up to two mail servers and sender addresses
on the Zyxel Device.
Log Setting Log Setting Use this screen to change your Zyxel Device’s log settings.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your Zyxel Device.
Backup/Restore Backup/Restore Use this screen to backup and restore your Zyxel Device’s configuration
(settings) or reset the factory default settings.
Reboot Reboot Use this screen to reboot the Zyxel Device without turning the power off.
Diagnostic Ping&Traceroute
&Nslookup
Use this screen to identify problems with the DSL connection. You can
use Ping, TraceRoute, or Nslookup to help you identify problems.
802.1ag Use this screen to configure CFM (Connectivity Fault Management) MD
(maintenance domain) and MA (maintenance association), perform
connectivity tests and view test reports.
802.3ah Use this screen to configure link OAM port parameters,
OAM Ping Use this screen to view information to help you identify problems with the
DSL connection.
Table 19 Navigation Panel Summary (continued)
LINK TAB FUNCTION