Operation Manual

93/100
www.zyxel.com
9.1.2 How to configure classifier on the switch?
Overview
After the classification, we need to define the policy rule to ensure that the traffic
gets the deserved treatment in the network. Here, we also define three policy
rules. The first policy rule is to forward (do not drop the matching frame previously
marked for dropping) only the traffic from port 2 and with the ip address of
192.168.1.100. The second policy rule is to discard all the traffic from port 2 on first
classifier; and we apply the second policy rule on second classifier. Moreover, do
not forget to apply a policy rule (do not drop the matching frame previously
marked for dropping) for our last classifier.
1. Select Active, set Name as “Dropallport2”, select classifier “Allport2”andselect
“Discard the packet” in Action, then click Add to run feature
Figure 5 Advanced Application >Policy Rule