User's Manual

Chapter 6 Wireless
EMG5324-D10A User’s Guide
101
6.2.3 More Secure (WPA(2)-PSK)
The WPA-PSK security mode provides both improved data encryption and user authentication over
WEP. Using a Pre-Shared Key (PSK), both the Device and the connecting client share a common
password in order to validate the connection. This type of encryption, while robust, is not as strong
as WPA, WPA2 or even WPA2-PSK. The WPA2-PSK security mode is a newer, more robust version of
the WPA encryption standard. It offers slightly better security, although the use of PSK makes it
less robust than it could be.
Click Network Settings > Wireless to display the General screen. Select More Secure as the
security level. Then select WPA-PSK or WPA2-PSK from the Security Mode list.
Figure 23 Wireless > General: More Secure: WPA(2)-PSK
The following table describes the labels in this screen.
Table 13 Wireless > General: WPA(2)-PSK
LABEL DESCRIPTION
Security Level Select More Secure to enable WPA(2)-PSK data encryption.
Security Mode Select WPA-PSK or WPA2-PSK from the drop-down list box.
Pre-Shared Key The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are the
same. The only difference between the two is that WPA-PSK/WPA2-PSK uses a simple
common password, instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters or 64 hexidecimal
digits.
more.../hide
more
Click more... to show more fields in this section. Click hide more to hide them.