User's Manual

Chapter 17 VPN
EMG5324-D10A User’s Guide
204
The following table describes the fields in this screen.
Table 67 Security > VPN > Setup
LABEL DESCRIPTION
Add New Tunnel Click this button to set up VPN policies for a new tunnel
# This is the VPN policy index number. Click a number to edit VPN policies.
Active This field displays whether the VPN policy is active or not. A Yes signifies that this VPN
policy is active. No signifies that this VPN policy is not active.
Tunnel Name This field displays the identification name for this VPN policy.
Local Address This field will display the IP address used by the Device.
Remote Address This field will display the Secure Gateway Address of the IPSec router with which you're
making the VPN connection
IPSec Algorithm This field displays the encryption algorithm used for an SA.
Both AH and ESP increase Device processing requirements and communications latency
(delay).
Modify Click the Edit icon to go to the screen where you can edit the VPN configuration.
Click the Remove icon to remove an existing VPN configuration.
Apply Click this to save your changes and apply them to the Device.
Cancel Click this return your settings to their last saved values.