User's Manual

Chapter 7 Wireless Security Screen
NWA1100-N User’s Guide
81
7.4.4.1 Access Point or Multi SSID
Use this screen to employ WPA and/or WPA2 as the security mode of your NWA that is in Access
Point or Multi SSID operating mode. Select WPA, WPA2 or WPA2-MIX in the Security Mode
field to display the following screen.
Figure 36 Security:WPA, WPA2 or WPA2-MIX for Access Point
The following table describes the labels not previously discussed
Table 18 Security: WPA, WPA2 or WPA2-MIX for Access Point
LABEL DESCRIPTIONS
Security Settings
Profile Name This is the name that identifying this profile.
Security Mode Choose WPA, WPA2 or WPA2-MIX in this field.
Rekey Options
ReAuthentication
Timer
Specify how often wireless stations have to resend usernames and passwords in order to
stay connected.
Enter a time interval between 10 and 9999 seconds. Alternatively, enter “0” to turn
reauthentication off.
Note: If wireless station authentication is done using a RADIUS server, the reauthentication
timer on the RADIUS server has priority.
Group Key
Update
Select this option to have the NWA sends a new group key out to all clients at the rate you
sepecify in the evey Second field.
The re-keying process is the WPA equivalent of automatically changing the group key for
an AP and all clients in a WLAN on a periodic basis.
every Seconds Enter how often you want the NWA to send a new group key out to all clients.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.
Back Click Back to return to the previous screen.