User's Manual

Chapter 26 ADP
ISG50 User’s Guide
414
• Delete an existing profile
26.3.1 Base Profiles
The ISG50 comes with base profiles. You use base profiles to create new profiles. In the
Configuration > Anti-X > ADP > Profile screen, click Add to display the following screen.
Figure 270 Base Profiles
These are the default base profiles at the time of writing.
26.3.2 Configuring The ADP Profile Summary Screen
Select Configuration > Anti-X > ADP > Profile.
Figure 271 Configuration > Anti-X > ADP > Profile
Table 136 Base Profiles
BASE PROFILE DESCRIPTION
none All traffic anomaly and protocol anomaly rules are disabled. No logs are
generated nor actions are taken.
all All traffic anomaly and protocol anomaly rules are enabled. Rules with a high or
severe severity level (greater than three) generate log alerts and cause packets
that trigger them to be dropped. Rules with a very low, low or medium severity
level (less than or equal to three) generate logs (not log alerts) and no action is
taken on packets that trigger them.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving your changes.