User's Manual

Chapter 19 System
NBG-417N User’s Guide
155
19.4 Time Setting Screen
To change your NBG-417N’s time and date, click Maintenance > System > Time Setting. The
screen appears as shown. Use this screen to configure the NBG-417N’s time based on your local
time zone.
Figure 98 Maintenance > System > Time Setting
he following table describes the labels in this screen.
Table 62 Maintenance > System > Time Setting
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your NBG-417N.
Each time you reload this page, the NBG-417N synchronizes the time with the
time server.
Current Date This field displays the date of your NBG-417N.
Each time you reload this page, the NBG-417N synchronizes the date with the
time server.
Time and Date Setup
Manual Select this radio button to enter the time and date manually. If you configure
a new time and date, Time Zone and Daylight Saving at the same time, the
new time and date you entered has priority and the Time Zone and Daylight
Saving settings do not affect it.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or the last time
configured manually.
When you set Time and Date Setup to Manual, enter the new time in this
field and then click Apply.