User's Manual

NBG-417N User’s Guide 175
CHAPTER 25
Product Specifications
The following tables summarize the NBG-417N’s hardware and firmware features.
Table 67 Hardware Features
Dimensions (W x D x H) 140 mm x 110 mm x 30 mm
Weight 190 g
Power Specification Input: 120~240 AC, 50~60 Hz
Output: 12 V DC 1A
Ethernet ports Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
4-5 Port Switch You can use either straight-through or crossover Ethernet cables (MDI/
MDI-X support) to connect multiple computers or servers (for example,
game servers) in your network to the NBG-417N.
You can add up to four computers to the NBG-417N without the cost of a
hub when connecting to the Internet through the WAN port. You can add
up to five computers to the NBG-417N when you connect to the Internet in
AP mode. Add more than four computers to your LAN by using a hub.
LEDs PWR, LAN1-4, WAN, WLAN/WPS
Reset Button The reset button is built into the rear panel. Use this button to restore the
NBG-417N to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
WPS button Press the WPS on two WPS enabled devices within 120 seconds for a
security-enabled wireless connection.
Antenna The NBG-417N is equipped with a 2dBi (2.4GHz) detachable antenna to
provide clear radio transmission and reception on the wireless network.
Operation Environment Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 20% ~ 90%
Storage Environment Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 20% ~ 95%
Table 68 Firmware Features
FEATURE DESCRIPTION
Default LAN IP Address 192.168.1.1 (router)
192.168.1.2. (AP)
Default LAN Subnet Mask 255.255.255.0 (24 bits)
Default Password 1234
DHCP Pool 192.168.1.33 to 192.168.1.64
Wireless Interface Wireless LAN