User's Manual

Chapter 4 Connection Wizard
NBG-417N User’s Guide
46
advisable to clone the MAC address from a computer on your LAN even if your ISP does not
presently require MAC address authentication.
Figure 21 Wizard Step 3: WAN MAC Address
The following table describes the fields in this screen.
Table 18 Wizard Step 3: WAN MAC Address
LABEL DESCRIPTION
Factory Default Select Factory Default to use the factory assigned default MAC address.
Clone the
computer’s MAC
address
Select this option and enter the IP address of the computer on the LAN whose
MAC you are cloning. It is advisable to clone the MAC address from a computer
on your LAN even if your ISP does not presently require MAC address
authentication.
Set WAN MAC
Address
Select this option and enter the MAC address you want to use.
Back Click Back to return to the previous screen.
Next Click Next to continue.
Exit Click Exit to close the wizard screen without saving.