Manualshelf

User's Manual

ManualsBrandsZyXEL ManualsNetwork RouterZyXEL ZyXEL Communications Network Router NBG-417N
41424344454647484950
Chapter 5 AP Mode
NBG-417N User’s Guide
50
2 To set your NBG-417N to AP Mode, go to Maintenance > Sys OP Mode > General and select
Access Point.
Figure 24 Maintenance > Sys OP Mode > General
3 A pop-up appears providing information on this mode. Click OK in the pop-up message window.
(See Section 22.4 on page 165 for more information on the pop-up.) Click Apply. Your NBG-417N
is now in AP Mode.
Note: You have to log in to the Web Configurator again when you change modes.
5.3 Status Screen (AP Mode)
Click on Status. The screen below shows the status screen in AP Mode.
Figure 25 Status Screen (AP Mode)