User's Manual

Chapter 5 AP Mode

NBG-417N User’s Guide

5.3.1 Navigation Panel

Use the menu in the navigation panel to configure NBG-417N features in AP Mode.

The following screen and table show the features you can configure in AP Mode.

Figure 26 Menu: AP Mode

The following table describes the sub-menus.

Packet Statistics Use this screen to view port status and packet specific statistics.

WLAN Station Status Use this screen to view the wireless stations that are currently associated to the

NBG-417N.

Table 19 Status Screen (AP Mode) (continued)

LABEL DESCRIPTION

Table 20 Menu: AP Mode

LINK TAB FUNCTION

Status This screen shows the NBG-417N’s general device, system and

interface status information. Use this screen to access the wizard,

and summary statistics tables.

Network

Wireless LAN General Use this screen to configure wireless LAN.

MAC Filter Use the MAC filter screen to configure the NBG-417N to block

access to devices or block the devices from accessing the NBG-

417N.

Advanced This screen allows you to configure advanced wireless settings.

QoS Use this screen to configure Wi-Fi Multimedia Quality of Service

(WMM QoS). WMM QoS allows you to prioritize wireless traffic

according to the delivery requirements of individual services.

WPS Use this screen to configure WPS.

WPS Station Use this screen to add a wireless station using WPS.

Scheduling Use this screen to schedule the times the Wireless LAN is enabled.

WDS Use this screen to set up Wireless Distribution System (WDS) on

your NBG-417N.

LAN IP Use this screen to configure LAN IP address and subnet mask or

to get the LAN IP address from a DHCP server.