User's Manual

Chapter 6 Tutorials
NBG-417N User’s Guide
57
The following figure shows you an example to set up wireless network and security by pressing a
button on both NBG-417N and wireless client (the NWD210N in this example).
Figure 29 Example WPS Process: PBC Method
6.2.1.2 PIN Configuration
When you use the PIN configuration method, you need to use both NBG-417N’s configuration
interface and the client’s utilities.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method
to get a PIN number.
2 Enter the PIN number to the PIN field in the Network > Wireless LAN > WPS Station screen on
the NBG-417N.
3 Click the Start buttons (or button next to the PIN field) on both the wireless client utility screen and
the NBG-417N’s WPS Station screen within two minutes.
The NBG-417N authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate
with the NBG-417N securely.
Wireless Client
NBG-417N
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES