User's Manual

Chapter 7 Wireless LAN

NBG-417N User’s Guide

7.10 Scheduling Screen

Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is

disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at

certain times. To open this screen, click Network > Wireless LAN > Scheduling tab.

Figure 52 Network > Wireless LAN > Scheduling

The following table describes the labels in this screen.

7.11 WDS Screen

A Wireless Distribution System is a wireless connection between two or more APs. Use this screen

to set the operating mode of your NBG-417N to AP + Bridge or Bridge Only and establish

Table 34 Network > Wireless LAN > Scheduling

LABEL DESCRIPTION

Enable Wireless

LAN Scheduling

Select this to enable Wireless LAN scheduling.

Action Select On or Off to specify whether the Wireless LAN is turned on or off. This

field works in conjunction with the Day and Except for the following times

fields.

Day Select Everyday or the specific days to turn the Wireless LAN on or off. If you

select Everyday you can not select any specific days. This field works in

conjunction with the Except for the following times field.

Except for the

following times

(24-Hour Format)

Select a begin time using the first set of hour and minute (min) drop down

boxes and select an end time using the second set of hour and minute (min)

drop down boxes. If you have chosen On earlier for the WLAN Status the

Wireless LAN will turn off between the two times you enter in these fields. If you

have chosen Off earlier for the WLAN Status the Wireless LAN will turn on

between the two times you enter in these fields.

Note: Entering the same begin time and end time will mean the whole day.

Apply Click Apply to save your changes back to the NBG-417N.

Reset Click Reset to reload the previous configuration for this screen.