User's Manual

Chapter 13 Remote Management
NBG-418N User’s Guide
117
The following table describes the labels in this screen.
Table 51 Management > Remote MGMT > WWW
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the NBG-418N using
this service.
Secured Client WAN IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
NBG-418N using this service.
Select All to allow any computer to access the NBG-418N using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the NBG-418N using this service.
Note: This only applies on WAN IP.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.