User's Manual

NBG-418N User’s Guide 137
CHAPTER 18
Sys OP Mode
18.1 Overview
The Sys OP Mode (System Operation Mode) function lets you configure select the device operation
mode: Router, Access Point, Client Bridge or Universal Repeater.
See Chapter 4 on page 35 for more information on which mode to choose.
18.2 General Screen
Use this screen to select how you connect to the Internet.
Figure 103 Maintenance > Sys OP Mode > General
The following table describes the labels in the General screen.
Table 58 Maintenance > Sys Op Mode > General
LABEL DESCRIPTION
System Operation Mode
Router Use this mode if you want to use routing functions such as LAN DHCP, NAT, firewall and
so on on the NBG-418N (N). The NBG-418N has separate LAN and WAN network IP
addresses.
Access Point Use this mode if you already have a Router (R) in your network and you want to bridge
all wired and wireless network connections.