User's Manual

Chapter 3 Connection Wizard
NBG-418N User’s Guide
32
Figure 18 Wizard Step 3: WAN MAC Address
The following table describes the fields in this screen.
3.5 Connection Wizard Complete
Click Apply to complete the wizard setup.
Figure 19 Connection Wizard Complete
Table 12 Wizard Step 3: WAN MAC Address
LABEL DESCRIPTION
Factory Default Select Factory Default to use the factory assigned default MAC address.
Clone the
computer's MAC
address - MAC
Address
Select this option to clone the MAC address of the computer (displaying in the screen)
from which you are configuring the NBG-418N. It is advisable to clone the MAC address
from a computer on your LAN even if your ISP does not presently require MAC address
authentication.
Set WAN MAC
Address
Select this option and enter the MAC address you want to use.
Back Click Back to return to the previous screen.
Next Click Next to continue.
Exit Click Exit to close the wizard screen without saving.