User's Manual

Chapter 4 Modes

NBG-418N User’s Guide

4.5.2 Client Bridge Navigation Panel

Use the menu in the navigation panel to configure NBG-418N features in Client Bridge Mode.

The following screen and table show the features you can configure in Client Bridge Mode.

Figure 38 Menu: Client Bridge Mode

Current Date/Time This field displays your NBG-418N’s present date and time.

System Resource

- CPU Usage This displays what percentage of the NBG-418N’s processing ability is currently

used. When this percentage is close to 100%, the NBG-418N is running at full

load, and the throughput is not going to improve anymore. If you want some

applications to have more throughput, you should turn off other applications.

- Memory Usage This shows what percentage of the heap memory the NBG-418N is using.

Interface Status

Interface This displays the NBG-418N port types. The port types are: LAN and WLAN.

Status For the LAN port, this field displays Down (line is down) or Up (line is up or

connected).

For the WLAN, it displays Up when the WLAN is enabled or Down when the

WLAN is disabled.

Rate For the LAN ports, this displays the port speed and duplex setting or N/A when

the line is disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN is

enabled and N/A when the WLAN is disabled.

Summary

Packet Statistics Use this screen to view port packet statistics.

Table 23 Status Screen (Client Bridge Mode) (continued)

LABEL DESCRIPTION