User's Manual

Chapter 6 Storage Screens
NSA-2401 User’s Guide
138
The following table describes the labels in this screen.
6.5.1 Creating a New RAID
Click the Create icon in the RAID screen as shown in Figure 128 on page 135 to create a new
RAID array.
Figure 129 Storage > Internal Storage > RAID > Create
Sort
Click a column’s heading cell to sort the table entries by that column’s
criteria. Click the heading cell again to reverse the sort order.
Status
This icon shows Healthy, Resynching, Degraded or Down; see Section
6.4.2 on page 134. If an array is degraded, click the Repair icon after you
have replaced the faulty disk.
Table 26 Storage > Internal Storage > RAID
LABEL DESCRIPTION
Label This field shows the name of the array.
RAID Level This field shows which type of data storage system (a RAID level or
JBOD) the array is using. See Section 6.4 on page 132 for details on the
different levels.
Capacity This field shows the total size of the array, how much is currently in use,
and how much is still available.
Disk This field shows the hard disks that are in the array.
Hot Spare If the array has a standby disk, this field identifies it.
Table 25 Storage > Internal Storage > RAID Icons (continued)
ICON
DESCRIPTION