User's Manual

Chapter 8 Sharing Screens
NSA-2401 User’s Guide
185
8.3.1.1 Group Names
Enter a group name from 1 to 16 characters. The first character must be alphabetical (case
insensitive, [A-Z a-z]); numeric characters are not allowed as the first character.
The group name can only contain the following characters:
• alphanumeric A-z 0-9 (there is no unicode support)
• Spaces
• _ [underscores]
•. [periods]
• - [dashes]
Other limitations on group names are:
• All leading and trailing spaces are removed automatically.
• Multiple spaces within names are converted to a single space.
• Group names are case insensitive. The group name cannot be the same (no matter the
case) as an existing local group or domain group. For example, if there exists a domain
group with the name 'BOB', you cannot create a local group named 'bob'. If you enter a
group 'bob' but use 'BOB' when connecting via CIFS or FTP, it will use the account
settings used for 'bob'.
The group name cannot be EVERYONE nor be the same as an existing local or domain
group. Other reserved group names that are not allowed are:
•daemon
•disk
•ftp
• nobody
•lp
•root
• tty
•utm
Available Users These are the user accounts that have been created on either the NSA or
the domain controller. Select the user(s) that you want to join the group
and then click the Add Selected Users) button.
You need to click Apply for the changes to take effect.
Group Membership These are the groups that the account already belongs to on the NSA.
Select the group(s) that you want the user to leave and then click the
Remove Selected Group(s) button.
You need to click Apply for the changes to take effect.
Apply Click this to save your changes.
Cancel Click this to discard changes and close the dialog box.
Table 55 Sharing > Groups > Add a New Local Group (continued)
LABEL DESCRIPTION