User's Manual

Chapter 11 Maintenance Screens
NSA-2401 User’s Guide
233
The following table describes the labels in this screen.
11.2.3 Log Buzzer Priority Configuration
Click Maintenance > Log > Log Config > Buzzer Priority to open a screen where you can
configure the audible buzzer’s settings. enable or disable the audible buzzer alarm feature and
set what severity level of logs trigger it.
Figure 195 Maintenance > Log > Log Config > Buzzer Priority
The following table describes the labels in this screen.
11.2.4 Report Configuration
Click Maintenance > Logs > Report Config to open the report configuration screens.
11.2.4.1 Mail Setting
This screen lets you configure whether or not logs are e-mailed.
Table 96 Maintenance > Log > Log Config > Log Records Configuration
LABEL DESCRIPTION
Log Reserve
Time:
Set the number of months, up to 10, to keep the logs stored on the NSA.
Save Log to: Select a user account on whose share you want to store the logs. The system
default stores logs in a neutral location.
Apply Click this to save your changes.
Cancel Click this to discard changes and close the window.
Table 97 Maintenance > Log > Log Config > Buzzer Priority
LABEL DESCRIPTION
Enable Buzzer Select this option to enable the audible buzzer alarm feature.
Use the drop-down list box to select the severity level of log that triggers the
audible buzzer.
When you enable this feature, the NSA sounds an audible alarm buzzer if it
generates a log of a severity level equal to or higher than the one selected in the
drop-down list box to the right.
Apply Click this to save your changes.
Cancel Click this to discard changes and close the window.