User's Manual

Chapter 11 Maintenance Screens
NSA-2401 User’s Guide
234
Figure 196 Maintenance > Log > Log Report Configuration > Mail Setting
The following table describes the labels in this screen.
11.2.4.2 Report Setting
This screen lets you configure which types of logs are e-mailed during alerts and reports.
Table 98 Maintenance > Log > Log Report Configuration > Mail Setting
LABEL DESCRIPTION
Enable Log
Email
Select this option to have the NSA periodically send log files by e-mail to the
account specified in the options below.
Email To Enter the e-mail address to which you want the logs e-mailed.
Email From Enter the e-mail address from which you want the logs e-mailed. This is the
address that appears in the e-mail’s From: field.
Email Server Enter the SMTP server the NSA will use to send the e-mail.
Email Format Select whether to send e-mails as HTML or as plain text.
Use SMTP
Authentication
Check this option if your SMTP mail server requires authentication in order to send
e-mails. If so, then you must also fill in the Account and Password fields.
User Enter the account name with which you log into your SMTP mail server.
Password Enter the password for the account name with which you log into your SMTP mail
server.
Password
(Confirm)
Re-enter the password for the account name with which you log into your SMTP
mail server to ensure you have entered it correctly.
After applying
settings, Send a
test email
Select this to have the NSA send an e-mail so you can may sure the settings are
correct and the NSA’s sending of e-mail is working properly.
Apply Click this to save your changes.
Cancel Click this to discard changes and close the window.