User's Manual

Appendix A Log Messages
NSA-2401 User’s Guide
272
System EMERG Temperature exceeds the upper
bound and may cause
damage.System is going to
shutdown.
System INFO Temperature is back to normal.
System EMERG Fan speed is too low and may
cause damage
System ERR Fan speed is lower than normal
speed.
System INFO Fan speed is normal.
System INFO Device is shutdown by
administrator
System NOTICE The system was shutdown
abnormally.
PWR BTN NOTICE System is shutdown by power
button
UPS EMERG Remaining battery charge below
limit on UPS. Doing shutdown.
USB NOTICE An external APC UPS device is
plugged.
USB NOTICE An external APC UPS device is
unplugged.
USB NOTICE An external Printer device is
plugged.
USB NOTICE An external Printer device is
unplugged.
USB NOTICE An external USB hub device is
plugged.
USB NOTICE An external USB hub device is
unplugged.
System -
FW
INFO CGI: File uploaded. File name:
{0}, file size: {1} bytes
File Name File Size
System -
FW
INFO The file {0} is verified and
restored, system is going to
restart
File Name
System -
FW
NOTICE The file {0} is corrupted. Stop
the configuration restoration.
File Name
System -
FW
NOTICE Firmware is upgrading from
version {0} to {1}
OLD_VERSI
ON
NEW_VER
SION
System -
FW
NOTICE Firmware upgrade fails, the file
is invalid or corrupted!
System -
Time
INFO NTP server is set to {0} NTP server
System INFO NTP updates successfully from
{0}
NTP server
System -
Time
INFO Clock timezone is set to {0} TimeZone
Table 114 Log Messages
FEATURE SEVERITY MESSAGE ARGUMENT(S)