User's Manual

Chapter 7 System Screens
NWA-3500/NWA-3550 User’s Guide
116
New Date
(yyyy:mm:dd)
This field displays the last updated date from the time server or
the last date configured manually.
When you set Time and Date Setup to Manual, enter the new
date in this field and then click Apply.
Get from Time
Server
Select this radio button to have the NWA get the time and date
from the time server you specify below.
Auto Select this to have the NWA use the predefined list of time
servers.
User Defined Time
Server Address
Enter the IP address or URL of your time server. Check with your
ISP/network administrator if you are unsure of this information.
Time and Date Setup
Time Zone Choose the time zone of your location. This will set the time
difference between your time zone and Greenwich Mean Time
(GMT).
Time Zone Setup
Daylight Savings Select this option if you use daylight savings time. Daylight saving
is a period from late spring to early fall when many countries set
their clocks ahead of normal local time by one hour to give more
daytime light in the evening.
Start Date Configure the day and time when Daylight Saving Time starts if
you selected Enable Daylight Saving. The at field uses the 24
hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on
the second Sunday of March. Each time zone in the United States
starts using Daylight Saving Time at 2 A.M. local time. So in the
United States you would select Second, Sunday, March and
2:00.
Daylight Saving Time starts in the European Union on the last
Sunday of March. All of the time zones in the European Union start
using Daylight Saving Time at the same moment (1 A.M. GMT or
UTC). So in the European Union you would select Last, Sunday,
March. The time you type in the at field depends on your time
zone. In Germany for instance, you would type 2 because
Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Table 21 System > Time Setting
LABEL DESCRIPTION