User's Manual

NWA-3500/NWA-3550 User’s Guide
289
CHAPTER 24
Troubleshooting
24.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• NWA Access and Login
• AP Management Modes
• Internet Access
• Wireless Router/AP Troubleshooting
24.2 Power, Hardware Connections, and LEDs
The NWA does not turn on. None of the LEDs turn on.
• Make sure you are using the power adaptor or cord included with the NWA.
• Make sure the power adaptor or cord is connected to the NWA and plugged in to
an appropriate power source. Make sure the power source is turned on.
• Disconnect and re-connect the power adaptor or cord to the NWA.
• If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
• Make sure you understand the normal behavior of the LED. See Section 1.7 on
page 34.
• Check the hardware connections. See the Quick Start Guide.