User's Manual

Chapter 3 Tutorial
NWA-3500/NWA-3550 User’s Guide
53
3.3.3.2 Set up Layer 2 Isolation
Configure layer 2 isolation to control the specific devices you want the users on
your guest network to access. Click WIRELESS > Layer-2 Isolation. The
following screen appears.
Figure 26 Tutorial: Layer 2 Isolation
The Guest_SSID network uses the l2isolation01 profile by default, so select its
entry and click Edit. The following screen displays.
Figure 27 Tutorial: Layer 2 Isolation Profile
Enter the MAC addresses and descriptions of the two network devices you want
users on the guest network to be able to access: the main network router
(00:AA:00:AA:00:AA) and the network printer (AA:00:AA:00:AA:00). Click
Apply.