User's Manual

Chapter 3 Tutorial
NWA-3500/NWA-3550 User’s Guide
61
3.4.3 Set Up E-mail Logs
In this section, you will configure the first of your four APs to send a log message
to your e-mail inbox whenever a rogue AP is discovered in your wireless network’s
coverage area.
1 Click LOGS > Log Settings. The following screen appears.
Figure 36 Tutorial: Log Settings
2 In this example, your mail server’s IP address is 192.168.1.25. Enter this IP
address in the Mail Server field.
3 Enter a subject line for the alert e-mails in the Mail Subject field. Choose a
subject that is eye-catching and identifies the access point - in this example,
“ALERT_Access_Point_A”.
4 Enter the email address to which you want alerts to be sent
([e-mail], in this example).