User's Manual

Chapter 16 Remote Management Screens
NWA-3500/NWA-3550 User’s Guide
199
16.3 The FTP Screen
You can upload and download the NWA’s firmware and configuration files using
FTP. To use this feature, your computer must have an FTP client.
Secured
Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate
with the NWA using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the IP address that you
specify to access the NWA using this service.
SSH
Server
Certificate
Select the certificate whose corresponding private key is to be used to
identify the NWA for SSH connections. You must have certificates
already configured in the Certificates > My Certificates screen.
Server Port This is set to port 22 by default.
You can change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Server
Access
Select the interface(s) through which a computer may access the NWA
using SSH.
Secured
Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate
with the NWA using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the IP address that you
specify to access the NWA using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 54 Remote Management: Telnet
LABEL
DESCRIPTION