User's Manual

Chapter 3 Tutorial
NWA-3500/NWA-3550 User’s Guide
56
marked E, and a computer, marked F, connected to the wired network. The coffee
shop’s access point is marked 1.
Figure 29 Tutorial: Wireless Network Example
In the figure, the solid circle represents the range of your wireless network, and
the dashed circle represents the extent of the coffee shop’s wireless network. Note
that the two networks overlap. This means that one or more of your APs can
detect the AP (1) in the other wireless network.
When configuring the rogue AP feature on your NWAs in this example, you will
need to use the information in the following table. You need the IP addresses of
your APs to access their Web configurators, and you need the MAC address of
each AP to configure the friendly AP list. You need the IP address of the mail
server to set up e-mail alerts.
Table 3 Tutorial: Rogue AP Example Information
DEVICE IP ADDRESS MAC ADDRESS
Access Point A 192.168.1.1 00:AA:00:AA:00:AA
Access Point B 192.168.1.2 AA:00:AA:00:AA:00
Access Point C 192.168.1.3 A0:0A:A0:0A:A0:0A
Access Point D 192.168.1.4 0A:A0:0A:A0:0A:A0
File / Mail Server E 192.168.1.25 N/A
Access Point 1 UNKNOWN AF:AF:AF:FA:FA:FA