User's Manual

Chapter 1 Introducing the ZyXEL Device
P-660HW-Tx v3 Series User’s Guide
28
1.7.1 Turn the Wireless LAN Off or On
1 Make sure the POWER LED is on (not blinking).
2 Press the WPS WLAN ON/OFF button for less than five seconds and release it.
The WLAN/WPS LED should change from on to off or vice versa.
1.7.2 Activate WPS
1 Make sure the POWER LED is on (not blinking).
2 Press the WPS WLAN ON/OFF button for five to ten seconds and release it.
Press the WPS button on another WPS-enabled device within range of the ZyXEL
Device. The WLAN/WPS LED should flash while the ZyXEL Device sets up a WPS
connection with the wireless device.
Note: You must activate WPS in the ZyXEL Device and in another wireless device
within two minutes of each other. See Section 8.8.8 on page 163 for more
information.