User's Manual

Chapter 10 Quality of Service (QoS)
P-663HN-51 User’s Guide
107
10.3 Queue Configuration
Click Advanced > Quality of Service > Queue Configuration to open the
following screen. This screen lists the QoS queues. A QoS queue sets the priority
used for incoming packets that the QoS classifier has grouped into a flow.
Figure 49 Advanced > Quality of Service > Queue Configuration
The following table describes the labels in this screen.
Table 36 Advanced > Quality of Service > Queue Configuration
LABEL DESCRIPTION
Interface name This field displays to which interface the queue applies. If it is a WAN
connection, the WAN connection’s DSL port, Virtual Path Identifier,
and Virtual Channel Identifier display here.
Description This field displays any extra configured identification information.
Precedence This shows the queue’s priority relative to the other queues. The lower
the number, the higher the priority.
Queue Key This is the queue entry’s index number.
Enable Select the check box to enable this classifier.
Remove To remove an entry, select its Remove check box and click the
Remove button.
Add Click this button to go to a screen where you can configure settings for
a new QoS queue.
Remove To remove an entry select its Remove check box and click the
Remove button.
Save/Reboot Click this button to apply and save your changes. The ZyXEL Device
restarts.