User's Manual

Chapter 18 Wireless LAN
P-663HN-51 User’s Guide
145
Note: If you have a wireless connection to the ZyXEL Device and you change the
ZyXEL Device’s SSID or country settings, you will lose your wireless connection
when you click Save/Apply. You must then change your wireless client’s
settings to match the ZyXEL Device’s new settings.
Figure 70 Wireless > Basic
The following table describes the labels in this screen.
Table 53 Wireless > Basic
LABEL DESCRIPTION
Enable
Wireless
Select this to turn on the wireless LAN.
Hide Access
Point
Select this to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Clients
Isolation
Select this to stop wireless clients from communicating directly with each
other through the ZyXEL Device’s wireless interface. This is also known as
layer-2 isolation.
Disable WMM
Advertise
WMM (Wifi MultiMedia) automatically prioritizes services according to the
ToS value in the IP header of packets. Turn off WMM advertising if your
wireless clients are not able to associate with an AP using WMM.