User's Manual

Chapter 18 Wireless LAN
P-663HN-51 User’s Guide
153
The following table describes the labels in this screen.
18.6.1 The MAC Filter Add Screen
Use this screen to add MAC address entries. Click Wireless > MAC Filter > Add
to open the following screen.
Figure 73 Wireless > MAC Filter > Add
The following table describes the labels in this screen.
Table 55 Wireless LAN > MAC Filter
LABEL DESCRIPTION
Select SSID Select the wireless network for which you want to configure MAC filter
settings.
MAC Restrict
Mode
Define the filter action for the list of MAC addresses in the table below.
Select Disabled to turn off MAC address filtering.
Select Allow to permit access to the ZyXEL Device, MAC addresses not
listed will be denied access to the ZyXEL Device.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed
will be allowed to access the ZyXEL Device
MAC
Address
This column displays the MAC addresses of the wireless devices that are
allowed or denied access to the ZyXEL Device.
Remove Select the entry(ies) that you want to delete in the Remove column, then
click the Remove button.
Add Click this to open a screen where you can add a MAC address entry to the
table.
Table 56 Wireless > MAC Filter > Add
LABEL DESCRIPTION
MAC
Address
Enter the MAC address of the wireless device that is to be allowed or denied
access to the ZyXEL Device. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Save/Apply Click this button to save the changes and have the ZyXEL Device start using
them.