User's Manual

Chapter 18 Wireless LAN
P-663HN-51 User’s Guide
155
The following table describes the labels in this screen.
18.8 The Advanced Setup Screen
To configure advanced wireless settings, click Network > Wireless LAN >
Advanced Setup. The screen appears as shown.
Table 57 Wireless > Bridge
LABEL DESCRIPTION
AP Mode Select the operating mode for your ZyXEL Device.
• Access Point -
The ZyXEL Device functions as a bridge and access
point simultaneously.
• Bridge - The ZyXEL Device acts as a wireless network bridge and
establishes wireless links with other APs.
To disable wireless bridging, set the Bridge Restrict field to Enabled
and do not list any remote bridge MAC addresses.
Bridge Restrict Select how to restrict which devices can form wireless bridges with the
ZyXEL Device.
Enabled - Only allow bridges listed in the Remote Bridges MAC
Address fields. You manually enter the MAC addresses in the Remote
Bridges MAC Address fields.
Enabled (Scan) - Only allow bridges listed in the Remote Bridges
MAC Address fields. The ZyXEL Device scans and lists the SSIDs and
MAC addresses of neighboring wireless devices. Select the ones that
you want to be able to form wireless bridges with the ZyXEL Device.
Disabled - Any wireless bridge is allowed to form wireless bridges with
the ZyXEL Device.
Remote Bridges
MAC Address
These are the MAC addresses of the peer wireless devices that can
make wireless bridge connections with your ZyXEL Device.
If you set the Bridge Restrict field to Enabled, manually enter the
MAC addresses in the Remote Bridges MAC Address fields.
If you set the Bridge Restrict field to Enabled (Scan), the ZyXEL
Device scans and lists the SSIDs and MAC addresses of neighboring
wireless devices. Select the ones that you want to be able to form
wireless bridges with the ZyXEL Device.
Refresh Click Refresh to reload the previous configuration for this screen.
Save/Apply Click this button to save the changes and have the ZyXEL Device start
using them.