User's Manual

Chapter 20 Settings
P-663HN-51 User’s Guide
179
20.3 Restoring Factory Defaults
Click Management > Settings > Restore Default to open the following screen.
Figure 89 Management > Settings > Restore Default
Click Restore Default Settings to clear all user-entered configuration
information and return the ZyXEL Device to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory
defaults of your ZyXEL Device.
You may need to change the IP address of your computer to be in the same
subnet as that of the default ZyXEL Device IP address (192.168.1.1). See the
appendix for details on how to set up your computer’s IP address.