User's Manual

Chapter 21 Logs
P-663HN-51 User’s Guide
183
21.4 Configuring Log Settings
Click Management > System Log > Configure System Log to display the
following screen. Use this screen to configure the level of events to log and where
to send logs.
Figure 92 Management > System Log > Configure System Log
The following table describes the fields in this screen.
Table 64 Management > System Log > Configure System Log
LABEL DESCRIPTION
Log This controls whether or not the ZyXEL Device logs events.
Log Level Select the lowest level of events that you want the ZyXEL Device to log.
The ZyXEL Device logs all events with that severity level or higher.
Display Level Select the lowest level of events that you want the ZyXEL Device to
display. The ZyXEL Device displays events with that severity level or
higher.
Mode Select Local to only record events in the ZyXEL Device’s memory. Select
Remote to send events to a remote syslog server. Select Both to record
events in the ZyXEL Device’s memory and send them to a remote syslog
server.
Server IP
Address
Enter the server name or IP address of the syslog server that will log the
selected categories of logs.
Server UDP
Port
Enter the UDP port number the ZyXEL Device is to use when sending
syslog events to the syslog server.
Save/Apply Click this button to save the changes and have the ZyXEL Device start
using them.