User's Manual

Chapter 22 SNMP
P-663HN-51 User’s Guide
187
22.2 SNMP Screen
To open this screen, click Advanced Application, Access Control, SNMP.
Figure 94 SNMP
The following table describes the labels in this screen.
Table 66 SNMP
LABEL DESCRIPTION
SNMP Agent Enable the SNMP agent to turn on SNMP on the ZyXEL Device.
Read Community Enter the get community, which is the password for the incoming
Get- and GetNext- requests from the management station.
Set Community Enter the set community, which is the password for incoming Set-
requests from the management station.
System Name Specify the name the ZyXEL Device uses for SNMP.
System Location Specify where the ZyXEL Device is.
System Contact Specify the name of the person administering the ZyXEL Device.
Trap Manager IP Enter the IP address of a station to send your SNMP traps to.
The ZyXEL Device sends a coldStart trap when the power is turned
on.
Save/Apply Click this button to save the changes and have the ZyXEL Device start
using them.
Port Enter the port number upon which the station listens for SNMP traps.