User's Manual

Chapter 26 Update Software
P-663HN-51 User’s Guide
200
The following table describes the labels in this screen.
Do NOT turn off the ZyXEL Device while firmware upload is in
progress!
After you upload firmware, wait before logging into the ZyXEL Device again. The
ZyXEL Device automatically restarts causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 103 Network Temporarily Disconnected
After the ZyXEL Device finishes restarting, log in again and check your new
firmware version in the Status screen.
Table 74 Management > Update Software
LABEL DESCRIPTION
Software File
name
Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that
you must decompress compressed (.zip) files before you can upload
them.
Update
Software
Click Upload to begin the upload process. This process may take up to
two minutes.