User's Manual

Chapter 5 WAN Setup

P-663HN-51 User’s Guide

Use Static IP

Address

If the ISP gave you a static (fixed) IP address, select this option and

enter it in the IP Address field.

If the ISP did not give you a static IP address, clear the Use Static IP

Address option. The ISP automatically assigns the WAN connection

an IP address when it connects.

Enable PPP debug

mode

Select this to turn on the debug mode for the PPP connection.

Bridge PPPoE

Frames Between

WAN and Local

Ports (Default

Enabled)

This feature is available when you do not select PPP IP extension.

In addition to the ZyXEL Device's built-in PPPoE client, you can enable

this to pass PPPoE through in order to allow LAN hosts to use PPPoE

client software on their computers to connect to the ISP via the ZyXEL

Device. Each host can have a separate account and a public WAN IP

address.

PPPoE pass through is an alternative to NAT for applications where

NAT is not appropriate.

Disable PPPoE pass through if you do not need to allow hosts on the

LAN to use PPPoE client software on their computers to connect to the

ISP.

Back Click this to return to the previous screen.

Next Click this to go to the following screen.

Table 16 Advanced Setup > WAN > Add (3: PPPoE) (continued)

LABEL DESCRIPTION