User's Manual

Chapter 3 Access Point Mode
WAP3205 User’s Guide
22
Wireless LAN General Use this screen to configure general wireless LAN settings.
Security Use this screen to configure wireless security settings.
MAC Filter Use the MAC filter screen to configure the WAP3205 to block
access to devices or block the devices from accessing the
WAP3205.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service
(WMM QoS). WMM QoS allows you to prioritize wireless traffic
according to the delivery requirements of individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
WDS Use this screen to set up Wireless Distribution System (WDS) on
your WAP3205.
LAN IP Use this screen to configure LAN IP address and subnet mask.
IP Alias Use this screen to have the WAP3205 apply IP alias to create LAN
subnets.
MAINTENANCE
General Use this screen to view and change administrative settings such
as system and domain names.
Password Password
Setup
Use this screen to change the password of your WAP3205.
Time Time Setting Use this screen to change your WAP3205’s time and date.
Firmware
Upgrade
Use this screen to upload firmware to your WAP3205.
Backup/
Restore
Use this screen to backup and restore the configuration or reset
the factory defaults to your WAP3205.
Reset/
Restart
Restart This screen allows you to reboot the WAP3205 without turning the
power off.
Sys OP Mode This screen allows you to select whether your device acts as an
access point, wireless client or both at the same time.
Table 5 Navigation Panel: Access Point Mode
LINK TAB FUNCTION