User's Manual

Chapter 4 Client Mode
WAP3205 User’s Guide
29
4.6.1.2 Static WEP
Use this screen if the access point to which you want to connect to uses WEP security mode.
Figure 15 Client Mode: WLAN > Profile: WEP
The following table describes the labels in this screen..
Apply Click Apply to save your changes back to the WAP3205.
Cancel Click Cancel to go back to the previous screen.
Table 9 Client Mode: WLAN > Profile: No Security (continued)
LABEL DESCRIPTION
Table 10 Client Mode: WLAN > Profile: WEP
LABEL DESCRIPTION
Wireless Setup
Profile Name Enter a descriptive name for this profile.
Network Name
(SSID)
Enter the name of the access point to which you are connecting.
Security
Security Mode Select Static WEP to enable data encryption.
PassPhrase Enter a passphrase (up to 26 printable characters) and click Generate.
A passphrase functions like a password. In WEP security mode, it is
further converted by the WAP3205 into a complicated string that is
referred to as the “key”. This key is requested from all devices
wishing to connect to a wireless network.