User's Manual

Chapter 4 Client Mode
WAP3205 User’s Guide
32
4.8 WPS Screen
Use this screen to enable Wi-Fi Protected Setup (WPS) on the WAP3205. Go to Configuration >
Wireless LAN > WPS to open the following screen.
Figure 18 Client Mode: WLAN > WPS
The following table describes the labels in this screen.
Signal Strength This displays the strength of the wireless signal. The signal strength mainly
depends on the antenna output power and the distance between your WAP3205
and this device.
Channel This displays the channel number used by this wireless device.
Encryption This displays the data encryption method used by this wireless device.
Authentication This displays the authentication method used by this wireless device.
Network Type This displays the network type (Infrastructure or Ad Hoc) of this wireless
device.
Rescan Click this button to search for available wireless devices within transmission range
and update this table.
Add Profile Select a wireless device and click this button to add it to a profile.
Table 12 Client Mode: WLAN > Site Survey (continued)
LABEL DESCRIPTION
Table 13 Client Mode: WLAN > WPS
LABEL DESCRIPTION
Station Site Survey
# Use the radio button to select the wireless device to which you want to connect
using WPS.
SSID This displays the SSID of the wireless device.
BSSID This displays the MAC address of the wireless device.
Signal Strength This displays the strength of the wireless signal. The signal strength mainly
depends on the antenna output power and the distance between your WAP3205
and this device.
Ch. This displays the channel number used by this wireless device.
Auth. This displays the authentication method used by this wireless device.