User's Manual

Chapter 8 Tutorials

WAP3205 User’s Guide

8 Enter the password and click Login to access the web configurator again.

9 Go to Configuration > Network > Wireless LAN > Universal Repeater to connect the

WAP3205 wirelessly to an AP. Select Enable. Enter the SSID of the existing AP or wireless router to

which you want to connect (“SSIDofMyAP” in this example). Enter the wireless security settings

which are the same as those on the existing AP or wireless router to access it (WPA-PSK and

“KeyofMyWirelessNetwork” in this example). Click Apply.

10 Set the channel number in the Wireless LAN > General screen to be the same as the one on the

wireless router or AP to which the WAP3205 is connecting. This allows wireless clients access or

acquire an IP address from another AP or wireless router through the WAP3205 in universal

repeater mode.