User's Manual

Chapter 10 Wireless LAN
WAP3205 User’s Guide
96
10.9 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN > WPS tab.
Note: With WPS, wireless clients can only connect to the wireless network using the first
SSID on the WAP3205.
Figure 67 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 37 Network > Wireless LAN > WPS
LABEL DESCRIPTION
WPS Setup
Enable WPS Select this to enable the WPS feature.
PIN Number This displays a PIN number last time system generated. Click Generate to
generate a new PIN number.
Status
Status This displays Configured when the WAP3205 has connected to a wireless
network using WPS or when Enable WPS is selected and wireless or wireless
security settings have been changed. The current wireless and wireless security
settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or
wireless security changes on the WAP3205 or you click Release_Configuration
to remove the configured wireless and wireless security settings.
Release
Configuration
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings
for WPS connections on the WAP3205.
802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can associate with
the WAP3205.
SSID This is the name of the wireless network (the WAP3205’s first SSID).
Security This is the type of wireless security employed by the network.
Apply Click Apply to save your changes back to the WAP3205.
Cancel Click Cancel to reload the previous configuration for this screen.