User's Manual

Chapter 7 Wireless LAN
NBG-460N User’s Guide
131
7.14 Accessing the iPod Touch Web
Configurator
To access the iPod Touch Web Configurator through your iPod Touch you must
first connect it to the NBG-460N’s wireless network. Follow the steps below to do
this.
Note: If you have not configured your wireless settings yet you can do so by using the
Wizard in the Web Configurator you access from your computer. Click the
Wizard icon or the Go To Wizard Setup web link you see after logging into
the Web Configurator from your computer. See Chapter 4 on page 49 for more
information on using the Wizard.
1 On the iPod Touch’s main screen press Settings and then press Wi-fi.
2 On the list of networks press the NBG-460N’s network name (SSID) to connect to
it. If you are prompted for any security settings enter them and press connect.
The pre-shared key is case-sensitive. If you have problems connecting then try
checking the security settings in the Web Configurator from your computer and try
again.
7.14.1 Accessing the iPod Touch Web Configurator
Now that you are connected to the NBG-460N’s wireless network you can access
the iPod Touch Web Configurator. To do this follow the steps below:
1 Launch the iPod Touch’s web browser from the main screen. The default web
browser is Safari.
2 Enter the IP address of the NBG-460N into the address bar and go to that address.
The default IP address for the NBG-460N is 192.168.1.1.