User's Manual

Chapter 11 Network Address Translation (NAT)
NBG-460N User’s Guide
167
Service Name Type a name (of up to 31 printable characters) to identify this rule in
the first field next to Service Name. Otherwise, select a predefined
service in the second field next to Service Name. The predefined
service name and port number(s) will display in the Service Name and
Port fields.
Port Type a port number(s) to be forwarded.
To specify a range of ports, enter a hyphen (-) between the first port
and the last port, such as 10-20.
To specify two or more non-consecutive port numbers, separate them
by a comma without spaces, such as 123,567.
Server IP
Address
Type the inside IP address of the server that receives packets from the
port(s) specified in the Port field.
Server Port This should match the value in the Port field.
Type the inside port number of the server that receives packets from
the port(s) specified in the Port field.
Wake up this
target by Wake
On LAN
Select this to use WoL (Wake On LAN) to turn on the server specified in
the IP address field when packets are received on the ports specified
in the Port field.
Note: For more information on Wake On LAN see Section 22.6 on
page 295.
Apply Click Apply to save your changes to the Application Rules Summary
table.
Reset Click Reset to not save and return your new changes in the Service
Name and Port fields to the previous one.
Application Rules Summary
# This is the number of an individual port forwarding server entry.
Active This icon is turned on when the rule is enabled.
Name This field displays a name to identify this rule.
Port This field displays the port number(s) used by the service or
application.
Server IP
Address
This field displays the inside IP address of the server.
Server Port This is the inside port number of the server that receives packets from
the port(s) specified in the Port field.
Wake On LAN This field displays No when Wake On LAN is disabled and Yes when
Wake On LAN is enabled.
Modify Click the Edit icon to display and modify an existing rule setting in the
fields under Add Application Rule.
Click the Remove icon to delete a rule.
Table 59 Network > NAT > Application
LABEL DESCRIPTION