User's Manual

Chapter 21 Logs
NBG-460N User’s Guide
271
21.5 Log Settings
You can configure the NBG-460N’s general log settings in one location.
Use the Log Settings screen to configure where the NBG-460N sends logs, the
schedule for when the NBG-460N sends the logs and which logs and/or immediate
alerts the NBG-460N to send.
Refresh Click Refresh to renew the log screen.
Clear Log Click Clear Log to delete all the logs.
# This is the number of the log entry.
Time This field displays the time the log was recorded. See the chapter on
system maintenance and information to configure the NBG-460N’s
time and date.
Message This field states the reason for the log.
Source This field lists the source IP address and the port number of the
incoming packet.
Destination This field lists the destination IP address and the port number of the
incoming packet.
Note This field displays additional information about the log entry.
Table 90 Maintenance > Logs > View Log
LABEL DESCRIPTION